Locksmith

DIY vs Professional Locksmith

When you have a locks and keys repair or installation that needs to be done, how do you know when to call in a professional and when it may be something you can tackle yourself. What is the difference between DIY vs professional locksmith? The answer depends on what the job is that needs to be done and whether or not you have the skills, tools, equipment, and time needed to get the job done right.

Do-It-Yourself projects are intended to save money while providing you with the rewarding feeling of knowing you did it yourself. Like any DIY project, unless you are a professional and have all of the necessary tools and equipment needed, the minutes become hours and even run into days or months with the project left partially finished. Almost everyone seems to have started what they thought to be a simple repair job and ended up needing to call in a professional for help hours or months later. When it comes to DIY locksmith projects, your safety and security could be at stake if the job is left half done or not done well. What seemed to be a quick lock repair or replacement can easily become an overwhelming, time-consuming and frustrating project. If you are living or working in an older property, you will face even greater challenges because the locking mechanisms may no longer be available to purchase.

 

Some of the typical DIY locksmith project attempts including working with locks such as:

  • Install or repair door knob locks
  • Install or repair deadbolt locks
  • Open, repair or replace vehicle trunk or ignition locks
  • Reprogram transponder keys
  • Open or repair combination locks
  • Open or replace safe locks
  • Replace, maintain or install mailbox locks
  • Install or repair electric locks and keyless entry locks

Each requires knowledge about the particular lock style you are working with, and all require specific tools and instructions to install, repair, or replace them properly.

Professional Locksmith

Professional Locksmiths are always standing by ready to help you finish a DIY job gone wrong or to handle the project from start to finish. If cost is the reason you chose to do it yourself in the first place, consider that the time you put into a job may end up taking longer than you have to spend. Plus, the initial cost of the lock, the parts, and the tools needed to get it done aren’t always your most economical choice since you will be purchasing expensive tools that you will probably never use again. Whereas, a professional locksmith already has these tools and equipment needed on hand.

Another reason to consider a professional locksmith from the start, besides the time saved, is that they have knowledge of and access to lock brands that are of higher and safer quality than the ones sold in over-the-counter home improvement stores. Ultimately, a professional will recommend the best lock for your situation to keep you secure – And, isn’t security the reason you wanted the lock in the first place?

As soon as you call, a professional locksmith who is licensed, bonded, and insured , will be on the way to help. These locksmiths are fully trained in all aspects of lock repair, install, and replacement.

Newer locks, designed for the utmost in protection and convenience, have become more complex. A professional locksmith has the specialty tools needed to repair, install, or replace these locks no matter how complex their features. A trustworthy professional will strive to provide you with the least costly solution in the most time efficient manner.

 

Before you attempt a DIY locksmith job and potentially spend frustrating hours working on a broken lock, leave the security of your home, car, or office to a professional. Call a professional locksmith to come to you and give you an estimate on the cost and time it would take if you hire them. Compare the two, and make an educated choice between DIY vs. professional locksmith repair, install or replacement jobs. If you decide to hand your do-it-yourself attempts over to the professionals, the locksmiths at Millennium Locksmith will give you peace of mind knowing your lock and key job will be completed in a professional manner at a price you can afford.

Realtor Locksmith Service

Property Management Companies and Realtors Locksmith Service

Locksmith Services for Realtors & Property Management Companies

Realtors and property managers have a great deal of responsibilities. You not only keep your clients or tenants happy, but you also must comply with local property codes, routine maintenance and repairs as well as keep up with all of the day-to-day duties. Security and safety are top priority. If you are a real estate agent or manage properties, you need a locksmith. Locksmith services for realtors and property management companies involve liability prevention, organizing key systems, rekeying between tenant turnover or managing lock boxes. Property management companies often benefit from having Master Key system installed as well so that the manager or maintenance personnel is able to gain access to the apartment units when necessary.

 

Ultimately, if you are a real estate agent or a property management company, you are responsible for safety and security of your building, houses you have for sale, and for the belongings and people inside. Traditionally, real estate agents use a lock box so that they can easily have access to the home’s key to show the property to potential buyers. Once inside, a real estate agent is showing off more than just the house. The potential buyers also have access to the layout of your home and notice where any valuables are placed inside. If these potential buyers are really after more than buying a home, they now have all of the information needed to return later for a burglary. Take precautions, as a real estate agent, to ensure you are not giving away too much. One step in the right direction is using electronic key code entry systems as opposed to locking up a key on the outside of the door with a combination lock. Another helpful tip to pass onto your home buyers is to make sure the first thing they do after buying a new home is having the locks changed or rekeyed.

 

As a property manager of an apartment, condominium, or rental property, you manage more than just the property. You have a responsibility of ensuring the safety of your renters as well. One of the best steps you can take is to require locks be re-keyed or changed when residents move out of an apartment or complex.


Locksmith Services for Realtors


Locksmiths are literally able to hold the keys to any property. So, when you are searching for a locksmith to frequently do business with in your rekeying, locks changing, or lock box security measures, be sure to choose wisely. First, check with a vendor management system to help recommend the best locksmiths in the area. Then, follow these steps to make sure the locksmith you are hiring to keep your building and tenants secure is the best.

Confirm the address you found online or in a phone listing directory matches the locksmith. Some companies list street addresses to give the impression that they are local when they are really out of a national call registry. Sometimes, these addresses end up being a vacant lot.

 

Call the number listed for the locksmith, and listen closely to how they answer the phone. Make sure they give a specific company name that matches the one you intended to call. If they answer with a vague phrase such as “Locksmith Services”, be leary.

 

Make sure the locksmith is insured for any potential damage left behind after their work is complete. This would include making sure the individual locksmith is bonded.

 

Before you agree to any work to be done by the locksmith, make sure that you have been given an estimate that is clear as to what it covers, preferably in writing.

 

Verify the locksmith with your state’s Attorney General office and local consumer protection agency as well as with the Better Business Bureau.

When the locksmith arrives, take a look at the vehicle they pull up in to make sure it is clearly marked with the company’s name. Ask for identification. Many states require that locksmiths carry state licensing identification. If you live in one of these states, ask for that as well. Also, be prepared to do the same. A legitimate locksmith will ask to verify your identification as well before any work is begun on opening up a lock.

Safe Lockout

Safe Lockout

Safe Lockout

A safe is intended to keep your valuables secure in case of an attempted break in, flood, or fire. However, what happens if you cannot open your own safe? When you have a safe lockout, follow these helpful tips from knowledgeable locksmiths.

 

Maybe you lost the key or forgot the combination. Maybe the power surged or went out or the electronic lock has a low battery. Or, maybe you accidentally broke off the key inside the lock. Maybe there are broken bolts or internal components that have become jammed inside the handle. Regardless of how it happened, you need help with your safe lockout to get it open so you can access or store your valuables.

 

First, you need to know what kind of safe you own. If you don’t know the brand or model, look on the safe for company logos that are usually located on the front of the safe. Or, locate your receipt or proof of purchase. If neither are found, look at the safe and take note of its size and method of construction. If you cannot figure out what kind of safe you have, contact a licensed professional locksmith who will be able to identify it.

 

Some methods of getting your safe opened include safe bouncing, overriding the lock, or safe cracking.  If you are able to get the safe open using the safe bouncing method, you probably need a more secure safe. The higher grade safes test to make sure the safe is able to resist safe bouncing attempts. This method of opening a safe includes striking the top of the safe while turning the handle at the same time, much like bumping a cylinder lock open.

 

If your safe has a small electronic keypad, like the ones found in hotel rooms for instance, it is designed with a combination code reset option. There may be a factory standard code that you will be able to input to reset the safe and get it opened. Sometimes, this code is a series of zeros that repeat or there may be openings on the bottom of the safe where you can access a combination reset switch on the inside of the door which takes a lot of skill to tackle. If you do not have access to the owner’s manual, contact the manufacturer or a knowledgeable locksmith who will be able to help.

 

Finally, safe cracking is another method of opening a safe when you are locked out. This is a task that requires precise skill and difficulty. It will most likely require the work of a skilled locksmith. If your safe has has a dial combination lock, it is a good candidate for safe cracking. However, it is possible to safe crack other models of safes, but these options include drilling a hole into the safe.


Safe Lockout


Safe Lockout Service

When you have a safe lockout, contact a professional locksmith who will be able to get your safe opened so you once again have access to your valuables that are stored inside or add to them without leaving damage to your safe. Call a local locksmith who knows how to help today.

Do Not Duplicate Keys

Are keys stamped with, “do not duplicate key” secure?

There are basically two kinds of keys – restricted and unrestricted. If the key is truly a restricted key, only a specialized locksmith will be able to duplicate it. Simply marking the key as Do Not Duplicate does not automatically make it a restricted key.

A do not duplicate key is sometimes referred to as a DND key. A stamp with a warning may prevent some people from duplicating the key, however more secure options and steps will need to be taken if you truly do not want your keys duplicated. It is just a warning marked on a key that really means nothing when it all comes down to whether or not it’s possible to duplicate. It does nothing more than a sign on a property saying do not enter, or a sign at a pool or lake stating, “swim at your own risk”.

If you really want your key to not be duplicated, more secure steps that make a key difficult to duplicate. High-security keys are offered by specific brands of lock and key manufacturers and require specialized equipment to cut the keys or close monitoring and control key-blank distribution. However, key duplication is one of the most violated security policies in business. If you do not have control over your keys, you do not have real security.

 

Why do “Do Not Duplicate Keys” exist?

Business owners and property owners began stamping “Do Not Duplicate” onto their keys in an attempt to control security violations from, for instance, terminated employees or former tenants. But, intruders are rarely ever stopped by just a warning message on a key. Rather, they simply take the key and have it duplicated. If someone wants to duplicate the key, there are plenty of locksmiths who have no problem doing so, and there is really no legal recourse. Though, there are locksmiths who will not duplicate these kinds of keys, so having the DND message on your key may actually hamper your company’s ability to provide keys to the people who need them.

Do Not Duplicate Keys
Do Not Duplicate Keys
Mul-T-Lock key

The Mul-T-Lock key has cuts that are called dimple cuts. The key requires specialized equipment to copy them. Distribution of the blanks for the keys are controlled which limits access to only trusted key duplication partners.

 

Another security measure to take to ensure your key is not copied is to make the lock difficult to pick. A typical pin and tumbler lock is fairly easy to pick or bump open if you know what you are doing, and burglars learn these skills quickly. Some lock manufacturers add additional pins to the typical 5-pin tumbler lock. Additional features might also be added such as angles or dimples.

 

Force Resistant or Bump Proof

One of the fastest ways to break into a property with a lock is to use blunt force, sometimes this force is referred to as bumping a lock. Installing a lock that is bump resistant or bump proof will help prevent a possible break in attempt by bumping.

 

When you need a do not duplicate key copied, you need to find a qualified locksmith who will be able to determine if you can legally duplicate the key. Better yet, implement extra security locks and keys to replace a do not duplicate key. Either way, the first and best place to look is to contact a local locksmith who will be able to serve your needs.

Bump Key

Bump Key

How is a bump key used, how does it work, is it new, and what are its limitations?

A bump key is a specially designed key that is used with a hammer or other item that applies blunt force to open a lock. These keys are usually used on a standard pin tumbler lock. While this sounds alarming as if it makes locks useless in protecting your property and keeping your family safe, there are limitations in what locks a bump key can open.

 

How a standard pin tumbler works

The basic parts of the lock include a key pin, a driver pin, a shear line, a cylinder, the plug, and the bible. The bible houses the plug, cylinder. The key is inserted into the cylinder. For a lock to open, it requires the use of the correct key. When a key is cut to fit a specific lock, the grooves are what allow the pins to line up properly with the shear line in order to turn the key and unlock the lock by turning the tumbler. The basic pin tumbler lock uses several stacks of pins. Each stack contains a bottom pin which is the key pin, a top pin which is the driver pin and a spring that is located above the top pin. The key pins are of varying lengths, while the driver pins are usually a standard length.

Using a bump key requires both skill and a bit of chance. A bump key is cut using the same brand of key as the lock. The grooves on the key are carefully filed down. The trick behind a bump key is that it moves the pins to either side of the shear line for just a quick amount of time that allows a blunt force, bump, to line up the driver pins above the shear line with the key pins below and allow the tumbler to turn.

 

Are Bump Keys New Technology?

Bump keys, or methods of picking a lock, have been around since the invention of the key and lock hundreds of years ago. The easiest keys to turn into a bump key are those that have a bow, the head of the key, a tip, the part that is inserted into the lock, cuts or grooves, and a shoulder, the part that rests against the edge of the outside of the lock to stop the key from going further into the keyhole when inserted. Years ago, locksmiths introduced a technique that was used to correct a cylinder that had been assembled improperly in their workshops and not as a way to break into a home. This technique involved tapping on a lock cylinder while applying pressure to make the pins jump inside the cylinder making the plug slide out freely.


Bump Key - Lock Bumping


Bump Key Limitations

Because almost all of residential doors in the United States use cylinder locks that are so vulnerable to bumping that a child could do it, they are an easy target for criminals. However, there are some limitations and show visible signs of forced entry when the lock is examined. A bump key will not work on high-security locking systems or on automobiles because vehicles do not use a pin tumbler style of lock but rather usually use sliders or wafer locks. However, there is a jiggle key that is somewhat similar to bumping.

 

How Do I Bump Proof My Locks?

First, take steps to securing your property by taking part in neighborhood watch programs, keeping landscaping trimmed so criminals may not hide as they try to gain access, and use security cameras and alarm systems. If your locks are more than five years old and have not been re-keyed, or if you have lost your keys or are not sure of who all has a copy of your keys, it is time to reevaluate your locks to make them bump proof. A deadbolt is the fastest, easiest, and most cost effective way to get a bump-proof lock. You could also install an anti-lock bumping device that prevents the turn knob that locks and unlocks the lock from turning, install security pins or high-security locks or a keyless entry system.

 

Ensure Your Locks and Keys are Safe and Secure

Making sure your locks are secure and safe from bumping attempts first requires knowledge of understanding how your locks and keys work followed by making the best decision for which locks you choose for your home or office. Learn how to properly protect your locks from bump key attempts of break-ins by contacting a knowledgeable and local locksmith who will be able to recommend steps to take or locking systems to install that are bump proof.

Panic Bar

Panic Hardware for Commercial Doors

Panic Bar / Exit Device For Your Business / Office Doors

Buildings used for commercial properties require specific safety measures such as installing panic hardware. All doors which are intended to function as emergency exit doors must have crash bars. Panic hardware for commercial doors is also sometimes referred to as a crash bar, exit device, panic device, or a push bar. It is a form of a lever tumbler lock used to unlock a door during an emergency when swift evacuation is in necessary. The panic hardware consists of a spring-loaded metal bar fixed horizontally to the inside of an outward-opening door. When the lever is pushed, it activates a mechanism that unlatches the door which allows occupants to exit the building swiftly, accounting for potential large crowds of people exiting quickly without having to waste life-saving time locating a key.

 

Panic Bar

 

Panic Bars May Be The Law

State laws and local regulations vary, so if you own a business, you may or may not be required to use panic bars. However, it is always the best step to understand all of your security options. For security reasons, panic hardware for commercial doors are designed so that they cannot be opened from the outside, but a door handle may be mounted on the other side of the door to allow the bar to be locked so that the door can be opened from either side.

 

Safety Is More Than Securing Building From A Break-In

When we think about locks and security, we usually think about keeping would-be crooks, or those who are looking to cause harm, out. But, what if there is a fire or another emergency that requires everyone in the building to exit as quickly and as safely as possible? That’s when panic hardware comes into play. When a large group of people need to leave quickly through one door opening, it rapidly produces a log-jam of people who are most likely in a panic and just want to get out. Because of this, the panic bar needs to operate smoothly so as not to create more danger in crowds of people pushing, trampling and piling into each other.

 

Panic Hardware Options

Choose from a wide variety of panic bar options. Some panic bar options include an alarm to alert everyone inside that they need to get out or to notify authority personnel that a resident is exiting the building. In the cases of nursing homes with dementia patients, hospitals or retirement homes who have apartment style living, museums or country clubs with high in and out traffic during typical, non-emergency business days, panic bars are designed to be quieter to keep noise to a minimum. Decide whether or not you want alarm additions, glass door options, cross bars and silencing mechanisms.

 

Safety Doesn’t Have To Come At A High Cost

Like any other safety device or lock, panic bars range in price but are affordable. When you are ready to install a panic bar, it pays to shop around and get the best device for the best price. Be sure to ask about the warranty or any guarantees as well as estimated maintenance expense. Often, you can save on costs by hiring a local locksmith to install the panic bars rather than a contractor. And, be sure to ask about volume discounts if you are installing several panic hardware devices.

 

If you own a commercial property or are wanting to install exit devices that allow people to leave the premises quickly and safely, panic hardware for commercial doors is the solution. Professional technicians who deal with locks and keys and understand the requirements for commercial properties are the ones to talk to before purchasing panic hardware for your commercial doors. Don’t just talk to a commercial locks salesman, speak with a local locksmith who works with locks for commercial properties, installs and services them. Ask for recommendations before you make your final decision.

Eviction Locksmith Service

Eviction Locksmith Service

Eviction Change Locks, Eviction Lockout, And More Information About Eviction Locksmith Service

Eviction is never an ideal, first step. It’s always used as a last resort to remove a renter, lessee, or home owner who has breached a lease or failed to make payments. In these situations, a locksmith is sometimes called in to change the locks on a rental property for a landlord or mortgage company. Locksmiths are also sometimes used by tenants prior to a legal eviction.

There are certain criteria to keep in mind when an eviction occurs. Both the tenant and the landlord have rights, and there are proper procedures to follow as to knowing when to get a locksmith involved:

As a tenant, if you arrive to find your home boarded up, call law enforcement immediately. Landlords are not legally allowed to lock a tenant out of their place of residency. The only possible exception to this rule of thumb might be if a legal Court Order for eviction has been obtained in the case of a home abandonment or if rent has not been paid. If you are still not allowed back into the property, call an attorney to obtain an Emergency Reentry Order or a Restraining Order, depending on your circumstances.


Eviction Process Locksmith ServiceEviction Locksmith Service

A locksmith is legally allowed to help a tenant re-enter their rental home provided a Court sanctioned Emergency Re-entry Order is obtained and shown.

A locksmith is legally allowed to install security devices for a tenant provided the rental agreement or lease allows it.

A locksmith is legally allowed to duplicate keys when shown proof of residency or for vehicles used during a move.

A locksmith is legally allowed to open mailbox locks, safe locks, garage locks, or storage area locks if proof of ownership is provided.


Evictions create bad feelings, and retaliation often occurs in the form of break-ins or other property damage. Landlords need to be aware of the potential for damage, theft, or break-ins and take necessary steps to avoid harm.

When a landlord has an Order for the Sheriff to evict an occupant, he or she may then call upon the services of a locksmith and plan on having the locksmith technician arrive at the same time as the sheriff.

When a renter becomes uncooperative, a locksmith is often able to open a door, leaving no damage to the lock or the door.

Once the apartment, condominium, or house is vacant, the landlord will need to have all of the locks replaced or changed to ensure the security of the premises. Landlords should then consider changing locks, security cards, and settings on key-less entry doors, intercom systems, safe locks, garage locks, storage area locks, gates, and mailboxes.

Locksmith Scottsdale

Mobile Locksmith Service

Scottsdale AZ Mobile Locksmith Services

If you go about day by day never really thinking about the varying aspects of a locksmith’s job, you are not alone. The majority of people probably never really think about what a locksmith does or the services they perform until they need one. Maybe you are standing there locked out of your front door or in a remote location late at night, or on a holiday, and discover your keys are locked inside your vehicle. These are just a couple scenarios in which mobile locksmith services are needed, and in a hurry.

A mobile locksmith specializes in being there when you need help. They come to you and work like a mobile, on-the-go and fully equipped, portable workshop. Mobile locksmith services are by your side in no time, usually less than 30 minutes. They show up in an emergency to perform assistance on lost keys, keys locked inside your car or home, locks change situations, as well as re-keying services. They travel to you, wherever you are, whether you are roadside, at your place of business, or sitting on your front porch and regardless of whether it is during business hours or late at night, on a weekend, or even on a holiday. A mobile locksmith is always there ready to come to you at your convenience, usually during very inconvenient times and worrisome situations. Mobile locksmiths are trained to work and fix any lockout situation in a timely manner to turn your emergency into a solution without wasting hours and getting it done right the first time.

 

There are several benefits to using mobile locksmith services as opposed to a standard locksmith:

 

Mobile Locksmith Scottsdale AZThey Respond Quickly to your Call for Help –  Mobile locksmiths are trained to respond fast to any kind of emergency that involves locks and keys. You may be locked out of your care in an out-of-the-way location, perhaps it’s even a bit unsafe, and it’s late at night. You may be locked out of your home unable to get your hands on a spare key. You may be in the middle of an employee dispute at work and need to change the locks immediately. Whatever your situation, a mobile locksmith will show up at your location in a timely manner. They get you back on the road fast, so your schedule is able to continue without a long interruption. A mobile locksmith is able to make a new set of keys for your home, office, or even reprogram transponder car keys, right there where you are.

 

Available – Lockout situations usually happen at the most inconvenient time, so the thought of scheduling this into your day for a standard locksmith to fit you in is not a consideration. Keys break, lockouts happen, or emergency locking services are needed often after hours. Most mobile locksmith services are available and ready to come to you 24/7 and are on call during holidays as well. No appointment scheduled time necessary. They show up to your location in no time when you call.

 

Are Well Trained – Before a locksmith is dispatched to help as a mobile locksmith, he or she must first go through rigorous training which prepares them to know understand and know how to work with a wide variety of types of locks and keys.

 

Special Training – Some mobile locksmiths are trained in specialty services. One of these specialties includes forensics where they come alongside a crime investigator to determine whether or not a lock has been tampered with.

 

Mobile locksmith services include re-keying, lock replacement, lockouts of office, home, or car, emergency lockouts or re-keying services, master key systems, lock installations, key-less entry and other coded electronic locks and keys and security issues involving locks, such as safes or certain types of alarm calls. A mobile locksmith may specialize in residential, commercial, or more detailed types of services. Start looking at the mobile locksmiths in your area now, before you are in an emergency situation. Then, find one you can trust to call on when you need mobile locksmith services in a hurry.


Search Here For Mobile Locksmith Service Near You.

Closed Circuit Television Camera

Home Security Cameras: CCTV

CCTV – Closed Circuit Television Camera

Your home security is vital for peace of mind and safety. Locks provide an obstacle for unwanted intruders, but wouldn’t it be fantastic if you could actually see who is coming to your house even if you’re not home? These are just some of the benefits that home security cameras: CCTV Closed Circuit TVs provide.

Security cameras are an excellent deterrent for would-be thieves and are a great way to check up on your house’s interior and exterior at all times. The footage captured on these cameras often provide helpful clues for law enforcement as well.

Home security cameras serve a few specific purposes. Obviously, they are intended to keep your property more secure as they serve as deterrents or proof for law enforcement. They are also used to keep an eye on your loved ones or pets when you cannot be there. Some send security alerts or video to your mobile phone or computer.


Explore the various types of security cameras that are in use today. Currently, there are about a dozen systems commonly used:

  • Bullet – Mounted cameras that are shaped like a rifle bullet and are small.
  • Covert – A hidden camera
  • Day and Night – A camera that can pick up on images in the daylight as well as with minimal nighttime darkness.
  • Discreet – A camera that is hidden in an object, like a spy cam.
  • Dome – Mounted and shaped like a dome to capture 360 degrees and hide the actual angle of the camera lens.
  • High Definition – A camera with a clear image and greater pixel for the best picture resolution.
  • Infrared Night Vision – Combines infrared illumination of spectral range 700-1000nm which is just below the visible spectrum of a human eye. The play back picture appears as a monochrome image, sometimes in green.
  • IP Wireless – An Internet Protocol camera that sends images and data through a computer or network system.
  • Network – An Internet Protocol camera that sends images and data through a computer network system.
  • Outdoor – A camera that is designed to stand up to the elements of outside weather.
  • PTZ/Speed Domes – Dome cameras with the feature of Pan Tilt Zoom and able to be controlled with a joystick.
  • Varifocal – A camera lens with variable focal length that allows focus to change as focal length and magnification changes.

Each camera comes with specific features, but most top-notch security camera features to look for include:

  • DVR Hard Drive for Recording is important if you want to pinpoint a specific event or potential security threat in your neighborhood. To do this, you would need to record everything all day long. So, having a hard drive with sufficient storage space to handle 24/7 recording is important. Including features that allow you to quickly locate a specific time frame is also necessary to save you time in watching hours of footage.
  • High Definition Resolution HD – If you don’t have a clear image of the person posing a threat to your safety, it will be near impossible to track them down. High Definition Resolution HD features eliminate frustrating grainy images like those often displayed from bank security cameras. It is important to be able to identify details if your home security is threatened so that potential burglars can be located quickly for police to take action. Look for pixel rates, because a higher pixel rate generally translates into higher resolution.
  • Infrared Detection for Night Vision is an important feature to pick up on activity even in the dark.
  • Motion Detection allows the camera to begin recording when motion is sensed, so it saves recording storage space until it’s necessary.
  • Remote Viewing Capability turns your home security cameras into a portable device by allowing you to monitor your home remotely on your mobile device or computer by using apps that interface with the home security camera.

CCTV Closed Circuit Television Camera

When shopping for the best home security camera that meets your needs, begin by speaking with someone who deals with security issues often – a locksmith. Those specialized in home security will be able to direct you to a home security camera: CCTV that is best for you.

Call your local professional locksmith today to set up an appointment to discuss home security cameras: CCTV installation, and choose the best home security camera for your household needs.

Locks

Expert Lock Maintenance Tips From Locksmiths

Expert Lock Maintenance Tips From Millennium Locksmith

In order for your locks to function at their maximum potential, they have to be properly taken care of and undergo regular maintenance. This is one simple thing that many homeowners tend to overlook, which is not an indictment of their character or the nature of their responsibility, it is simply the way things are. That is why your trusted locksmiths are here to give you their expert tips and advice on how to properly maintain your locks.

Some people might ask, why is it even important to maintain your locks? It is important to realize that your locks are an integral part of your home security. If your locks are not as strong as they should be, due to poor maintenance, then the security of your home will bear the consequences. In addition to this, homeowners will find themselves changing locks more times than they should. Locks that are old and not properly cared for are easily bypassed and they will also not operate the way that they were intended. Without further ado, here are some of the expert lock maintenance tips that will come in handy for you and your home.

Locks

Regularly Lubricate Your Lock

Lubricating your lock is an important maintenance tip that should be carried out annually. This practice will help increase the lifespan of your lock and ensure that it continues to work as intended. There are many locksmiths who suggest the use of WD-40 as a good lubricant, but sometimes it is better to use Tri-Flow. This lubricant uses less harmful chemicals that are not as harsh on the locking mechanism. Lubricating the lock on a regular basis will prevent the lock from sticking and it will also slow the process of rusting.

Homeowners should strive to lubricate their locks every few months, but if they cannot adhere to this, they should lubricate the lock as soon as it starts to become hard to use. One clear sign that the door lock has become hard to use starts when the lock begins to stick and when it no longer moves in a fluid motion.

 

Craft Spare Keys

Another expert tip that many homeowners overlook involves crafting a spare key for your locks. Aside from the fact that this is a good thing for homeowners to do anyway, it also helps increase the lifespan of your lock. Locks and keys are used on such a regular basis that people tend to overlook the fact that they go hand in hand. Properly maintaining your lock helps your key work well, and vice versa. In most cases, a key will begin to wear out far before a lock even shows minor signs of decreased functionality. Crafting a spare key allows you to switch out your keys as soon as one begins to wear down, which will help you keep your lock properly maintained.

I’m sure there are people wondering how having a spare key even helps maintain your lock. When a key is inserted into a lock, it works in conjunction with the components of the lock to either lock or open the device. Each of these components (key and lock) have to be functioning properly in order for these actions to occur fluidly. Since keys tend to deteriorate faster than locks, the key will potentially malfunction and scratch against the lock with its continued use, which will then compromise the integrity of the lock.

 

Gently Clean Your Locks

Cleaning is a staple of properly maintaining anything, and the same concept applies to cleaning locks. Cleaning your locks will ensure that they stay strong and last longer. Locks are not only made up of the locking mechanism, because the casing that houses the lock mechanism is also part of the lock itself. If the exterior of the lock deteriorates while the interior remains in pristine condition, the lock will still eventually have to be replaced. In this instance, both sides of the metaphorical coin need to be polished.

The process of cleaning your locks exterior will ensure that it remains safe from constantly being exposed to natural elements including dirt, dust, and grime. In addition to this, the act of cleaning your locks on a regular basis will also give you the opportunity to inspect them and make sure that everything is copacetic.

Once you set out to clean your locks, always be mindful of the materials, chemicals and method that you use to do this. It is important to make sure that you do not use cleaning products that are abrasive or moderately high in acidity. The best option is to use a damp rag and a gentle detergent, which will not cause any harm to your lock.

 

Make Sure Deadbolt Is Working Properly

This might sound redundant to some, but don’t get ahead of yourself. One of the key steps to maintenance is to make sure that all the components of the lock are working as they should. More specifically, it is important to make sure that your deadbolts and your latch are working properly.

It is important that the deadbolt and the latch are working as intended because if they are not, it can result in the lock being damaged as well as the door. This damage will leave any homeowner with a hefty bill. The deadbolt or latch should have enough space to extend and retract fully, and it should be securely set within the door when locked. Issues with the deadbolt and the latch have been known to escalate and damage locks so it is necessary to tackle this head on before it spreads.

 

Clear Out Your Strike

Clearing out your strike plate is key to making sure that your locks are properly maintained. The strike can be easily clogged up with dirt, debris, and, in most high schools, gum. There have been cases where locks have been damaged by something as simple as a clogged strike, so it is important to make sure it is kept clear.

 

Conclusion

There is no magic art to properly maintaining your locks, it simply boils down to having the patience to check your locks and knowing what to look out for. It is a trait that homeowners should adopt because it not only saves them money over time, but it also helps increase home security. Locks are important, but many people tend to forget just how crucial they are to home security. Hopefully, these expert maintenance tips outlined above will give you some semblance of how to get the best out of your locks, while simultaneously setting them up to last.

 

Author Bio

Ralph Goodman is a professional writer and the resident expert on locks and security over at

the Lock Blog. The Lock Blog is a great resource to learn about keys, locks and safety. They

offer tips, advice and how-to’s for consumers, locksmiths, and security professionals.